General product information P Series Chrome-Iron Dewatering Pump
Schurco P Series is designed to provide exceptional performance in high head mine dewatering as well as general dewatering applications.
Single pumps can achieve heads over 50% higher than standard slurry pumps. These dewatering pumps are ideal for dirty water and light slurry (slurry specific gravities of roughly 1.05) and provide the end-user with the ultimate in reliability.
P Series Chrome-Iron Dewatering Pump
Impeller – Double volute design to reduce radial loads, and thrust reduction impeller design to reduce axial thrust loads, thus enhancing bearing life.
Casing – Wet-end components are manufactured in wear-resistant alloys to suit the application providing these pumps with unique wear advantages over many similar pumps on the market
Expeller (Centrifugal Seal) – no external sealing water required where applicable. Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment. Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field. Oil bath lubrication for higher operating speeds against the standard grease lubrication in other assemblies.
P Series Chrome-Iron Dewatering Pump Profile
- Discharge Diameters 4” to 6” (100mm to 150mm)
- Heads through 420ft (128m)
- Flow rates Through 2,250 gpm (510 m3/h)
- Casing Pressure Tolerance 300psig (2,020kPa)
Frame and Shaft
Designed for front pull-out or back pull-out dismantling of the frame and shaft assembly from the casing, which remains in place, connected to the intake and discharge pipework. This enables a rapid replacement of frame and shaft assembly with a standby unit while leaving the pipework undisturbed.
P Series Chrome-iron dewatering pump:
*Technical team/consultant Thai Khuong Pumps is ready to connect to support you with information about industrial pumps as quickly as possible. Contact immediately with Thai Khuong Pumps, so we can support you better.