
Bơm trục đứng đa tầng cánh
inox, cột áp cao
Bơm ly tâm trục đứng đa tầng cánh thân inox — nhiều cấp cánh nối tiếp cho cột áp cao mà vẫn gọn mặt bằng. Cho cấp nước cao tầng, tăng áp, RO/lọc màng và công nghiệp. Chính hãng DOOCH (Hàn Quốc).
How to select correctly Bơm trục đứng đa tầng cánh
Xác định lưu lượng & cột áp
Cột áp cao (cao tầng, RO, boiler) cần số tầng cánh phù hợp; lưu lượng quyết định cỡ bơm.
Chọn vật liệu
Inox 304 cho nước sạch; inox 316 cho ăn mòn nhẹ và yêu cầu vệ sinh cao.
Chọn dòng & thương hiệu
DRL cho áp 35–40 bar; XR(L) inox 316 cho cột áp tới ~350 m. Kỹ sư TKT tư vấn theo CO-CQ.
2 model Bơm trục đứng đa tầng cánh

Diaphragm pump selection theo bộ ba
No single diaphragm pump configuration fits all fluids. Select by the trio: fluid × wetted materials (body + diaphragm/ball) × port size & flow rate. Hai bảng dưới ánh xạ nhanh yêu cầu thực tế sang cấu hình phù hợp.
Ma trận chọn theo lưu chất / yêu cầu
| Requirement / fluid | Recommended configuration | Note |
|---|---|---|
| Corrosive chemicals (acid, alkali, solvents) | PP/PVDF body · PTFE diaphragm | Match materials to chemical — see table below |
| Viscous / shear-sensitive fluids (paint, adhesive, ink) | Santoprene/Neoprene diaphragm · ball valve | Gentle pumping, low shear, no separation |
| Particle-laden / slurry / sludge | Cổng lớn 1.5"–3" · van bi | Ball valves allow particles through; dry-run safe |
| Explosive atmosphere (solvents, fuel) | ATEX configuration · earthing | Air-operated, spark-free — ATEX/IECEx |
| Food & beverage | Hygienic line · 316SS · FDA diaphragm | CIP, phụ gia, sản phẩm dạng sệt |
| Drum & IBC extraction | Portable configuration, self-priming | Chemical transfer from drum/IBC |
Ma trận vật liệu màng theo hóa chất
| Fluid / chemical | PTFE | Santoprene | Buna-N | EPDM | Viton |
|---|---|---|---|---|---|
| Dilute acid / alkali | A | A | C | A | B |
| Concentrated acid / oxidizing | A | B | D | C | B |
| Aromatic solvents (toluene/xylene) | A | C | C | D | A |
| Ceton (acetone/MEK) | A | C | D | A | D |
| Oil / fuel | A | C | A | D | A |
| Abrasive / solid particles | C | A | B | B | B |
⚠️ Bù trừ: EPDM kỵ dầu & dung môi thơm; Viton kỵ ceton & kiềm; Buna-N hợp dầu nhưng kỵ ceton/axit mạnh; PTFE trơ với hầu hết hóa chất khi chưa chắc (kém đàn hồi hơn). Thân bơm: Nhôm · Inox 316 · PP · PVDF. Hướng dẫn chung — TKT engineer confirms material compatibility for your chemical →
Khi nào chọn bơm trục đứng đa tầng
Bơm trục đứng đa tầng cánh đạt cột áp cao mà vẫn gọn mặt bằng (in-line). Phù hợp cấp nước cao tầng, RO/lọc màng và boiler feed. Thân inox 316.
| Nhu cầu | Phù hợp? | Ghi chú |
|---|---|---|
| Cấp nước cao tầng, cột áp cao | Rất phù hợp | DOOCH XR(L) inox 316 |
| RO / lọc màng áp cao | Rất phù hợp | XR(L) |
| Boiler feed / nồi hơi | Suitable | XR(L) |
| Lưu lượng lớn, cột áp thấp | Cân nhắc hỗn lưu / trục ngang | xem bơm trục đứng / trục ngang |
| Cần tự mồi / hút sâu | Không phù hợp | xem bơm tự mồi |
⚠️ Đa tầng đứng cho cột áp cao & mặt bằng hẹp; lưu lượng lớn cột áp thấp nên dùng hỗn lưu/trục ngang. Khi ghép biến tần + tủ thành hệ thì là hệ tăng áp. Hướng dẫn chung — kỹ sư TKT tư vấn →
DOOCH vertical multistage pump series
Series by material & pressure (per product description). Click a row for details.
| Series | Brand | Material | Characteristics |
|---|---|---|---|
| XR(L) Series | DOOCH | 316 stainless steel | Head up to ~350 m, versatile in-line |
Figures per product short description (DOOCH South Korea). Send flow rate + head + fluid details for TKT engineers to recommend stage count and material.
- Footprint: Space-saving (vertical)
- Pipe mounting: In-line convenient
- High head: Achievable
- Maintenance: More complex
- Cost: Higher
- Footprint: Requires floor space
- Pipe mounting: Requires base frame
- High head: Achievable
- Maintenance: Easier
- Cost: Lower
Vertical multistage centrifugal pump in stainless steel — XR(L) series Inox 316 (head up to ~350 m, multistage) for high-rise water supply, pressure boosting, RO, and boiler feed. TKT genuine distributor with CO-CQ documentation.
Thái Khương Pumps is the genuine distributor for DOOCH (South Korea) stainless steel vertical multistage centrifugal pumps — XR(L) Inox 316 series with high head — for high-rise water supply, pressure booster systems, RO, and boiler feed. Includes CO-CQ documentation; TKT engineers advise based on flow rate and head.
Used in where
Bơm trục đứng đa tầng cánh phục vụ cấp nước cao tầng, tăng áp, lọc RO/màng, boiler feed và rửa công nghiệp — chọn số tầng cánh và vật liệu inox theo cột áp và lưu chất.
Need repair, maintenance or spare parts?
After-sales technical team for all pump brands — genuine diaphragm sets, ball valves, repair kits.
Questions frequently asked
A vertical multistage centrifugal pump has a vertical shaft with multiple impeller stages in series to achieve high head while saving floor space. Stainless steel casing is suitable for clean water and mildly corrosive fluids.
Depends on the number of stages and model; the XR(L) Inox 316 series achieves head up to ~350 m. Exact figures vary by model — contact TKT engineers.
Inox 304 for clean water; Inox 316 for mildly corrosive fluids and hygiene requirements. Selection depends on fluid type and environment.
The vertical multistage pump is the pump unit itself; when combined with a variable frequency drive, control panel, and pressure vessel into a system, it is called a pressure booster system. See also the Booster Pump page.
TKT is the genuine distributor for DOOCH (South Korea) vertical multistage pumps — XR(L) Inox 316 series, with CO-CQ documentation. Call 0941.400.488.





