AFFETTI PUMPS 

Model CFG – Horizontal Fiberglass Centrifugal Pump ANSI/ASME B73.1

The was developed for mildly to severely corrosive liquids and is able to withstand arduous working conditions. All wetted parts are in reinforced fiberglass material, in order to resist abrasion and severe temperatures between -45°C (-50°F) and 120°C (250°F). The Series CFG horizontal centrifugal coupling pumps are designed according to ANSI / ASME B73.1, presenting new features and innovations to be more competitive.

Model CFM – Horizontal Fiberglass Centrifugal Pump ANSI/ASME B73.1

CFM close-coupled horizontal centrifugal pumps with ANSI/ASME B73.1 suction and discharge outlets presents strong and resistant construction.

Model CGD – Centrifugal Horizontal Normalized DIN 24256 ISO 2858

The CGD pump range, centrifugal horizontal normalized to DIN EN 22858 ISO 2858, has been designed in order to face strong applications. Easy to handle, the pumps of this range are strong, produced in their components with high thickness to give a product with maximum reliability.

Model CDM – Close Coupled Pumps

The centrifugal monobloc range CDM has been designed in order to obtain the best performances at a reduced cost. Easy to handle, the pumps of this range are strong, compact construction, produced in their components with high thickness to give a product with the maximum reliability.

The centrifugal monobloc range CMO-N has been designed in order to obtain the best performances at a reduced cost. Easy to handle, the pumps of this range are strong, compact construction, produced in their components with high thickness to give a product with the maximum reliability. Suitable to transfer acid and basic solutions, the wet ends, are produced in thermoplastics (PP-PVDF) and O-ring in the proper elastomer material…

Model MMB-N – Close Coupled Magnetic Pumps

The centrifugal monobloc magnetical driven pump, range MMB, has been designed to solve the different problems generated sometimes from the leakage through the mechanical seals, with the consequence to cause serious environmental contaminations. The impeller rotation is possible thanks to a movement transmitted from the coupling through magnetical induction. Easy to handle, the pumps of this range are strong, compact construction, produced in…

MSP-N – Model MSP-N – Centrifugal Self-Priming Pumps

The centrifugal monobloc self-priming magnetical driven pump, range MSP, it has been designed for installations. Where is not possible to install an underhead pump. The MSP pumps can prime from a negative suction head of 4 meters, after that the priming chamber has been filled the first time. The impeller rotation is possible thanks to a movement transmitted from the coupling through magnetical induction. this pump has been designed to solve the…

Model MSP-E – Centrifugal Self-Priming Pumps

The centrifugal monobloc self-priming magnetical driven pump, range MSP, it has been designed for installations. Where is not possible to install an underhead pump. The MSP pumps can prime from a negative suction head of 4 meters, after that the priming chamber has been filled the first time. The impeller rotation is possible thanks to a movement transmitted from the coupling through magnetical induction. this pump has been designed to solve the…

Model MSP-T – Centrifugal Self-Priming Pumps

The MSP-T version is designed to pump corrosive fluids containing a limited quantity of suspended solid particles. The impeller is driven by a steel shaft fixed rigidly to the motor. The externally fitted mechanical seal is the single, B6E system with rings in SiC and elastomer bellows; it is also equipped with a washing system using water or clean fluid compatible with the fluid pumped.

Model CGV-N – Vertical Pumps

The vertical centrifugal with coupling range CGV-N has been designed in order to obtain the best performances and total reliability. Easy to handle, the pumps of this range are strong, compact construction, produced in their components with high thickness to give a product with the maximum strength. Suitable to transfer acid and basic solutions, the wet ends, are produced in thermoplastics (PP-PVDF-PEHD)and O-ring in the proper elastomer…

Model CGV-S – Cantilever Vertical Pumps

The CGV-S range of cantilever pumps was designed to meet a demand for vertical pumps that could operate without any risk of damage to the shaft guide bushings from abrasive solid particles contained in the fluid or from dry running, such that the design does not foresee any guide mechanisms close to the impeller. The carbon steel 42CrMo4 pump shaft coated in corrosion-proof plastic, assembled in a cantilever manner, and guided by…

Model VGA – Volumetric Self-Priming Pump

The volumetric self-priming pump with elastic coupling, range VGA has been designed to load-unload basins, tank-trucks, tanks where is no possible the flooded installations. Reversible and easy to handle, the VGA pumps can prime from a negative suction head of max of 4 meters without the necessity to feel the priming chamber the first time. Easy to handle, the pumps of this range have strong construction, produced in their components with high…

Model VMA – Volumetric Self-Priming Close Coupled Pumps

The volumetric self-priming close-coupled pump, range VMA has been designed to load-unload basins, tank-trucks, tanks where is no possible the flooded installations. Reversible and easy to handle, the VMA pumps can prime from a negative suction head of max 4 meters without the necessity to feel the priming chamber the first time. Easy to handle, the pumps of this range have strong construction, produced in their components with high thickness to…

In addition to pumps from Affetti, Thai Khuong Pumps carries the widest range of industrial and mining pumps in VietNam. This allows us to help you achieve the best possible solution for your specific pumping requirements. All situations are unique, therefore Thai Khuong Pumps takes pride in consulting with our end users and our ability to provide the lowest cost, most-effective solution possible.