L Series Lined Slurry Pumps - Schurco Slurry

Schurco Slurry® L Series pumps maintain the ruggedness and slurry handling capacity of the S Series, but with a wider range of flow rates and lower life-cycle costs. Higher efficiency impellers make the L Series a valuable feature in any plant.

L Series Lined Slurry Pumps Profile

• Discharge Diameters 3” to 22” (75mm to 550mm)
• Heads through 180ft (55m)
• Flow-rates through 30,000gpm (6,8 00m3/h)
• Casing pressure tolerance to 250psig (1,725kPa)

L Series Lined Slurry Pumps Features

Value

• Flow-rate and head delivered at reduced initial and life-cycle costs with greater efficiency over the S series
• Designed for Class III and below slurries, retaining the ruggedness of a heavy-duty slurry pump

Wetted Parts

• Impellers – higher efficiency rates (up to 90+ %) – pump out vanes to reduce recirculation within pump, and aid in preventing seal contamination; Impeller clearance is adjustable to maintain efficiency over the life of the part.
• Liners – Alloy or thick elastomer liners provide superior erosion and corrosion resistance

Seals

• Expeller (Centrifugal Seal) – no external sealing water required where applicable
• Stuffing Box – flushed gland sealing with braided packing and a lantern ring
• Mechanical Seals

Bearing Assembly

• Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment
• Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field

Interchangeable with Warman® L Series pumps.