Máy bơm từ trục đứng dòng MSVKC series FTI
In stock · Official distribution
Certification
CE UKCA EAC ATEX (tùy chọn)
Finish Thompson, Inc. (FTI) SKU: FTI-MSVKC

Finish Thompson MSVKC Vertical Multistage Magnetic Drive Centrifugal Pump

Finish Thompson MSVKC vertical multistage magnetic drive centrifugal pump is a sealless magnetic drive centrifugal pump (no mechanical seal) in the MSVKC series by Finish Thompson (FTI, USA). Per the Finish Thompson datasheet: maximum flow rate 13.9 m³/h, maximum head 30.2 m, operating temperature up to 60°C, wetted materials PP, PVDF. The magnetic coupling eliminates leakage through seals — safe for corrosive and hazardous chemicals, smooth and durable operation. Officially distributed in Vietnam by Thái Khương Pumps.

13.9m³/h
Flow rate
30.2m
Head
60°C
Temperature
0.62–2HP
Motor
Official FTI distribution since 2022 Sealless pumps Engineers on duty 24/7
Request a Quote📞 0941.400.488
TK
Application engineer on duty 15-min response · Mon–Sat
Hotline 0941.400.488
Request a Quote
Free consultation Datasheet
SKU: FTI-MSVKC Categories: , , Brand:

01 · Datasheet

Thông số kỹ thuật

Max flow rate
13.9 m³/h
Max head
30.2 m
Operating temperature
đến 60°C
Motor
0.62–2HP
Suction/discharge port
1.5in/1in
Wetted materials
PP, PVDF
Pump type
Ly tâm dẫn động từ sealless (không phốt)

Performance curve for MSVKC — request the original Finish Thompson PDF datasheet via the Datasheet button.

02 · Applications

Lĩnh vực suitable

Corrosive chemicals

Transfer of corrosive acids, alkalis and solvents. Sealless magnetic-drive design — no mechanical seal, eliminating leakage and vapor emission of hazardous chemicals.

Khám phá →

Electroplating & surface finishing

Recirculation, filtration and transfer of plating solutions (nickel, chrome, acid). The ETFE-lined UltraChem UC line and Penguin filtration systems are dedicated to plating tanks.

Khám phá →

Wastewater treatment

Chemical dosing, inter-tank transfer and neutralizing-solution pumping. The sealless DB/SP lines are durable with water-treatment chemicals.

Khám phá →

High viscosity & drums

Draw from drums/IBC totes of plastics, glue, resin and oil. The HVDP screw drum-pump line handles viscosities up to 100,000 cP.

Khám phá →

05 · Related products

Products cùng dòng

Bơm thùng phuy Finish Thompson SFS
In stock FTI-SFS

Finish Thompson SFS drum pump

—→
Bơm Thùng Phuy Dòng HVDP - Finish Thompson
In stock FTI-HVDP-SERIES

Drum Pump HVDP Series - Finish Thompson

—→
Bơm thùng phuy trục vít Finish Thompson HVDP-LR
In stock FTI-HVDP-LR

Finish Thompson HVDP-LR Screw Drum Pump

—→
Bơm ly tâm dẫn động từ Finish Thompson GP Series
In stock FTI-GP-SERIES

Finish Thompson GP Series Motor-Driven Centrifugal Pump

—→
Bơm ly tâm dẫn động từ Finish Thompson AV Series
In stock FTI-AV-SERIES

Finish Thompson AV Series Motor-Driven Centrifugal Pump

—→
Bơm ly tâm dẫn động từ Finish Thompson UCP 436L
In stock FTI-UCP436L

Finish Thompson UCP 436L Magnetic Drive Centrifugal Pump

—→
Bơm thùng Phuy Finish Thompson EFV-40
In stock FTI-EFV40

Finish Thompson EFV-40 Drum Pump

—→
Bơm thùng phuy Finish Thompson EFS
In stock FTI-EFS

Finish Thompson EFS Drum Pump

—→

03 · Thai Khuong Capabilities

Real people · Real work · Real projects

Visit our HCMC warehouse, technical team, test lab, and 12,000+ projects delivered with Finish Thompson across Vietnam.

19+Years of experience
12k+Projects delivered
5k+SKUs in stock
View Capabilities
Warehouse & team video · 2:14

05 · FAQ & Quote

Questions frequently asked

What differentiates the MSVKC from the VKC?
The MSVKC series is the two-stage multistage variant of the VKC: achieving head up to ~30.2 m compared to ~8–12 m for the single-stage VKC, thanks to the interstage drive shaft. Same vertical in-tank mounting style, no aeration, seal-less PP/PVDF.
What head does the MSVKC pump achieve?
The MSVKC achieves head up to ~30.2 m at flow rates up to ~13.9 m³/h, pressure up to 80 psi, temperature up to 60°C — suitable when chemicals need to be pumped to height or over long distances from the storage tank.
Can the MSVKC be installed inside a tank?
Yes. The MSVKC is installed vertically in a sump or collection pit, similar to the VKC (column length 18–66 inch), with no shaft seal required at the tank bottom and no air injection into the fluid — the only difference is that it is multi-stage to deliver higher head.
Is the MSVKC magnetic drive pump (vertical multistage) available in stock in Vietnam?
Thai Khuong Pumps has been the authorized representative of Finish Thompson Inc. (USA) in Vietnam since 06/2022. The HCMC warehouse keeps the common lines in stock; models not in stock are ordered from the FTI factory (Erie, Pennsylvania) with CO-CQ. Call 0941.400.488 to check stock.
What is the warranty period for the MSVKC (vertical multistage) pump?
A 12-month warranty in Vietnam through Thai Khuong Pumps (authorized Finish Thompson representative) covers material/workmanship defects when genuine spare parts are used — with parts and technical support included.
Is there a datasheet and technical support for the MSVKC series?
Yes. TKT engineers provide the original Finish Thompson datasheet (performance curves, dimensions, wetted materials) and advise on model selection for the MSVKC series based on chemical compatibility. Click the Datasheet button on the page or call 0941.400.488.

01 · Mô tả chi tiết

Thông tin sản phẩm

Bơm dẫn động từ Finish Thompson dòng MSVKC (trục đứng đa cấp)

Series MSVKC là bơm dẫn động từ trục đứng đa cấp (hai tầng) — tăng cột áp so với VKC một tầng nhờ trục dẫn động nối giữa các tầng. Đặt trong bồn/hố thu, không sục khí, seal-less PP/PVDF tới 60°C, áp tới 80 psi. Cột áp tới ~30,2 m.

Cấu tạo & nguyên lý hoạt động

  • Trục đứng đa cấp (hai tầng): cột áp cao hơn VKC một tầng.
  • Trục dẫn động nối tầng truyền lực giữa các tầng cánh.
  • Đặt trong/ngoài bồn, không sục khí — như dòng VKC.
  • Seal-less mag-drive PP/PVDF — không phốt, không rò rỉ.

Bảng thông số các model dòng MSVKC

Model Lưu lượng tối đa (m³/h) Cột áp tối đa (m) Nhiệt độ (°C) Motor
MSVKC 13,9 30,2 60 0.62–2HP

Vật liệu tiếp xúc: PP / PVDF · trục dẫn động nối tầng. Dải số là tối đa theo từng cấu hình — không phải một model đạt đồng thời. Gửi tên hóa chất + lưu lượng/cột áp để kỹ sư TKT chọn đúng model.

Typical applications

Hút hóa chất từ bồn/hố thu khi cần cột áp cao (đẩy xa, lên cao); tuần hoàn áp lực trong bồn; nơi cần kết hợp lắp trong bồn và cột áp lớn.

Chọn model nào?

  • Cột áp cao trong bồn (~30 m): MSVKC.
  • Chỉ cần cột áp tiêu chuẩn trong bồn: dùng VKC một tầng.
  • Đặt ngoài bồn, hút ngập: dùng dòng DB/MSDB.

Liên kết liên quan

Nguồn thông số: datasheet Finish Thompson (finishthompson.com / ftiair.com). Phân phối chính thức tại Việt Nam bởi Thái Khương Pumps — hỗ trợ kỹ thuật, phụ tùng và báo giá.