Abel
Catalog động · cập nhật theo kho
20 model Bơm cao áp - Bơm piston
Filter & sort
Định nghĩa · Spec · Cách chọn cấu hình
Select correctly High-pressure pump
Từ định nghĩa, dải thông số đến 3 bước chọn model — tất cả trong một mạch.
High-pressure pump (high-pressure piston pump) in plunger design uses reciprocating cylindrical pistons (plungers) inside cylinders, forcing fluid through check-valve assemblies to generate very high pressure (up to ~3,000 bar). Multi-plunger configurations (triplex/quintuplex) deliver uniform flow and durability for continuous operation.
Applications: high-pressure water jetting, waterjet cutting, hydro-demolition (concrete breaking), descaling, pipeline/vessel hydrotesting, and high-pressure hydraulics. Flow rate and pressure trade off against each other — select based on the specific operating point.
1
Define pressure & flow rate
Determine the working pressure (bar) and flow rate (l/min) for the application — pressure and flow trade off against each other, so the required operating point must be clearly established.
2
Select plunger configuration & drive
Triplex/quintuplex based on flow uniformity and power requirements; electric motor or diesel engine drive depending on available power source and mobility needs.
3
Select accessories & brand
Spray gun, nozzle, cutting head, safety valve, and pulsation dampener according to the application. Choose Kamat (Germany) with CO-CQ documentation; TKT engineers provide configuration consultation.
High-pressure plunger pump or centrifugal pump?
When very high pressure is required, a positive-displacement plunger pump is the appropriate choice; centrifugal pumps are suited to high flow rates at moderate pressure.
| Criteria | High-pressure plunger | Centrifugal |
|---|---|---|
| Very high pressure | Suitable (up to ~3,000 bar) | Limited |
| High flow rate | Moderate | Suitable |
| Jetting / waterjet cutting | Suitable | No |
| Flow uniformity | Pulsation dampener required | Smooth |
| Efficiency at high pressure | High | Low |
| Cost | Higher | Lower |
Distributed brands
Thương hiệu bơm cao áp tại TKT
KAMAT
KAMAT
KAMAT (Đức) — bơm piston plunger áp suất rất cao cho cắt nước áp lực, làm sạch công nghiệp, thuỷ lực và dầu khí. TKT phân phối chính hãng tại Việt Nam.
Xem thương hiệu KAMAT → Ứng dụng & danh mục
Where it's used — and which line to choose?
Các ngành thường dùng dòng bơm này. Nếu nhu cầu khác, chuyển nhanh sang các dòng còn lại.
6 typical application industries
High-pressure water jetting
Surface, pipeline, and industrial equipment cleaning with high-pressure water jets.
Waterjet cutting
Waterjet cutting of metal, stone, and composite materials.
Concrete demolition & breaking
Hydro-demolition strips damaged concrete while preserving reinforcing steel.
Pipeline & vessel hydrotesting
Hydrotest for pressure integrity of pipelines, vessels, and valves.
Descaling
Cleaning scale deposits from heat exchangers and boilers.
High-pressure hydraulics
Supplying high-pressure hydraulic power to specialised equipment.
Q&A · Quote
Questions frequently asked
It is a positive-displacement pump that uses reciprocating cylindrical pistons (plungers) in cylinders through check-valve assemblies to generate very high pressure (up to ~3,000 bar). Triplex/quintuplex configurations deliver uniform flow and durability for continuous operation.
Essentially they belong to the same family: a 'high-pressure piston pump' is a plunger pump — using a cylindrical piston (plunger) reciprocating to generate very high pressure. 'Plunger' is the technical term for the cylindrical piston in industrial high-pressure pumps; both terms refer to the same type of positive-displacement pump used for water jetting, waterjet cutting, and hydrotesting up to ~3,000 bar.
Depending on the model and configuration — industrial plunger pumps can reach pressures up to approximately 3,000 bar (some models higher). Pressure and flow rate trade off against each other; for specific figures see the brand page or contact TKT engineers.
Centrifugal pumps are efficient at high flow rates and moderate head; at very high pressures their efficiency drops significantly. Piston/plunger pumps (positive displacement) maintain high efficiency at high pressure and are therefore suited to water jetting, waterjet cutting, and hydrotesting.
Triplex has 3 plungers, quintuplex has 5 plungers. More plungers produce more uniform flow (lower pressure pulsation) and better load distribution, suitable for higher power and continuous duty.
Yes. Hydro-demolition uses high-pressure water jets to remove deteriorated concrete while preserving reinforcing steel — clean and with less vibration compared with mechanical breaking. A high-pressure plunger pump and specialised spray head are required.
Electric motor or diesel engine (for mobile site work). Select based on available power source, required power output, and mobility requirements.
TKT distributes genuine Kamat (Germany) high-pressure pumps — triplex/quintuplex plunger series for water jetting, waterjet cutting, and hydrotesting, supplied with CO-CQ documentation. See the brand page or call 0941.400.488.